Automatic Extruder Blow Molding Machine( Double Station )

The 2L-16L double station blow moulding machine is different from the single station machine in that it has one additional station with high-precision linear guide, covering four major series of ZQD-2L,ZQD-5L,ZQD-10L and ZQD-16L. The same as the single station machines, it can be used to produce a wide variety of materials, such as PE, PP, and PA. The largest capacity of the product can be 10L, and its production capacity is 60 to 70% more than the single station machine. In accordance with different type of products, die heads can be changed to achieve multi-type production. Setting: Clamping------------Double station+Hight-precision guide+large arm cylinder axle Extrusion system--Hard gear surface reducer+Japan inverter Die system----------Central-incoming extrusion die with special steel Hydraulic system--Japan hydraulic valve seal and proportional control Control system----Japan PLC+Imported HMI+PLC automatic Specification 銆? ZQD-2L ZQD-5L ZQD-10L ZQD-16L Material 銆? PE? PE? PE? PE? Max.container capacity L 2 5 10 16 Number of die set 1銆?銆?銆? 1銆?銆?銆? 1銆?銆?銆? 1銆?銆?銆? Output pcs/hr 950脳2 750脳2 700脳2 600脳2 Machine Dimension m 2.7脳2.0脳2.5 3.4脳2.2脳2.6 3.9脳2.3脳3 4.9脳4脳3.1 Total weight ton 4 6.5 9.5 10 Accumulator head 銆? ZQD-2L ZQD-5L ZQD-10L ZQD-16L Number of die heating zone 3 3 3 4 Power of die heating KW 4.2 5.8 6-7 6-7 Max die-pin diameter mm 60 80 140 140 Center distance of twin-die mm 130 160 240 260 Center distance of tri-die mm 85 110 160 180 Center distance of four-die mm 65 85 120 130 Clamping Unit 銆? ZQD-2L ZQD-5L ZQD-10L ZQD-16L Clamping force KN 38 70 110 155 platen opening stroke mm 135-370 145-510 230-600 230-600 platen size mm 280脳380 320脳390 450脳490 500脳490 Max mould size mm 300脳320 350脳370 520脳500 600脳500 Mould thickness mm 135-210 155-300 235-380 235-380 Extruder Unit 銆? ZQD-2L ZQD-5L ZQD-10L ZQD-16L Screw diameter mm 60 70 90 90 Screw L/D ratio L/D 24:1 24:1 25:1 25:1 Extruding Volume Kg/hr 60-80 100-120 130-160 130-160 Number of heating zone zone 3 3 4 4 Extruder heating power KW 5-6.6 6-8.2 8.2-9.3 8.2-9.3 Extruder driving power KW 15-18.5 22-37 37-45 37-45