- Box type platen structure designed through finite element analysis ensures even stress, less deformation, high precision mold clamping & good rigidty.
- Optimized tie bar design makes sure stable and speedy movement with less impact.
- Lengthened distance between tie bar, mold thickness and opening stroke for bigger mold.
- Optimized Lubrication system ensures precise mold clamping and prolonged life time of mold clamping components.
- Speedy differential clamping function meet the requirement of special movement.
- Multi-ejector pin mode.
- Clamping, injection and ejection position controlled by high precision electronic linear
2. Injection unit
- Twin carriage cylinders ensures even stress and improved injection precision. (Standard feature for K90VT~ K200VT, optional feature for above K260VT)
- fast response injection and sealing construction
- Movable slide guide-way for hopper, more convenient for material change.
- Both PID and Percentage control are available for nozzle temperature control
- 5 stage injection, 3 stage hold pressure, 3 stage melting control to meet the requirement of different products.
- accurate temperature control for material ensures production quality.
3. Power system
- Japanese Sumitomo gear pump, high efficiency, low noise, easy maintenance.
- Servo system package from famous, manufacturers with unit parameter and standard.
- Closed-loop control for pressure and speed, the RPM and the torque can be real-time adjusted, resulting in excellent repeatability.
- Ultra high energy saving. The energy consumption reaches China 1 st grade energy consumption standard of injection molding machine.
- High performance redundant power saving design. The power of motor is up to 10% higher than counterpart in the industry, avoiding motor over-heating or auto stop due to insufficiency of power.
4. Computer controller
- Taiwan Mirle computer controller
- Specially developed for injection molding machine
- X86 300MHZ main board/8
- Adoption RISC 140MHZ dual core mirco processor ensures high processing speed
- SPC quality control/ Superior & inferior product identification and statistical system.
- Adoption Ethernet network ensuring speedy connection.
- USB interface/SPC data transfer function.
- Choice of metric and imperial unit system.
- Record of alarm history and parameter function.
- Auto-adjustment PID temperature control and temperature curve display function
- Preheating and heat guard function
- Auto purge function
- screw cold start prevention
- Auto adjustment for clamping force and position
- Both data and curve display of cushion
- Multi core puller function
- Robot interface
- Input/output interchange function
- Locking of software data
- Precise linear adjust function of flow and pressure
5. Specification
| DEscriptION | UNIT | K200S | ||
| A | B | C | ||
| Screw diameter | mm | 45 | 50 | 60 |
| Shot volume | cm3 | 389 | 481 | 692 |
| Shot weight(ps) | g | 365 | 452 | 650 |
| Oz(盎司) | 12.9 | 16 | 23 | |
| Injection rate | cm3/sec | 168.5 | 208 | 299.5 |
| Injectin pressure | MPa | 217 | 176 | 122 |
| Screw L/D ratio | 23:1 | 20.5:1 | 17:1 | |
| mm/s | 106 | |||
| Screw stroke | mm | 245 | ||
| Screw speed | rpm | 0-180 | ||
| Clamping force | kN | 2000 | ||
| Opening stroke | mm | 460 | ||
| Platen size | mmxmm | 740×740 | ||
| Space between tie bars | mmxmm | 510×510 | ||
| Max.daylight | mm | 1010 | ||
| Mold thickness(min-max) | mm | 185-550 | ||
| Hydraulic ejection stroke | mm | 150 | ||
| Hydraulic ejection force | kN | 49 | ||
| Ejector pin | 4+1 | |||
| Hydraulic system pressure | MPa | 17.5 | ||
| Pump motor | kW | 22 | ||
| Heating capacity | kW | 12.2 | ||
| Number of temp control zones | 5 | |||
| Oil tank capacity | L | 300 | ||
| Machine dimensions | mxmxm | 5.3×1.4×2.1 | ||
| Machine weight | kg | 5500 | ||
